Skip to content

Vertical or Horizontal, Kitamura has the 5-Axis machining solution to give you the competitive edge needed to machine all of your complex, multi-sided parts in one set-up.  Kitamura’s Trunnion table design offers the users increased accuracy and rigidity, simple set-up and ease of programming for the operator and allows for maximum stiffness and flexibility with the ability to position the work piece closer to the spindle. 4+1 or full simultaneous control, their 5-axis line up has you covered.

Mytrunnion-Series

High precision simultaneous 5-axis machining, linear scale feedback, solid box ways.

Mytrunnion-1

  • Travel (X, Y, Z): 12.8″ x 20.1″ x 18.1″ (325 x 510 x 460mm)
  • Spindle: 30 taper, 15,000rpm
  • Std. 60 tool ATC
  • Rapid Feed: 1,969ipm
  • Positioning Accuracy: +/-0.000039″ Full Stroke
  • Repeatability: +/-0.00002″

Mytrunnion-4G

  • Travel (X, Y, Z): 24″ x 24″ x 19.7″ (610 x 610 x 500mm)
  • Spindle: 40 taper, 15,000rpm
  • Std. 60 tool ATC (Opt. 100)
  • Rapid Feed: 1,969ipm
  • Positioning Accuracy: +/-0.000079″ Full Stroke
  • Repeatability: +/-0.000039″

Mytrunnion-5G

  • Travel (X, Y, Z): 32″ x 29.3″ x 19.7″ (815 x 745 x 500mm)
  • Spindle: 40 taper, 20,000rpm
  • Std. 50 tool ATC (Opt. 100)
  • Rapid Feed: 1,969ipm
  • Positioning Accuracy: +/-0.000039″ Full Stroke
  • Repeatability: +/-0.00002″

Mytrunnion-7G

  • Travel (X, Y, Z): 46.9″ x 54.3″ x 30.1″ (1,190 x 1,380 x 765mm)
  • Spindle: 50 taper, 12,000rpm
  • Std. 100 tool ATC
  • Rapid Feed: 1,969ipm
  • Positioning Accuracy: +/-0.000079″ Full Stroke
  • Repeatability: +/-0.000039″

XVT-Series

Built-in 4th/5th axis trunnion table, linear and solid box guideways.

Mycenter-3XVT

  • Travel (X, Y, Z): 30.7″ x 20.1″ x 17.3″ (780 x 510 x 439mm)
  • Spindle: 40 taper, 15,000rpm
  • Std. 40 tool ATC
  • Rapid Feed: 1,890ipm

Mycenter-4XT

  • Travel (X, Y, Z): 31.50″ x 24.02″ x 20.08″ (800 x 610 x 510mm)
  • Spindle: 40 taper, 15,000rpm
  • Std. 30 tool ATC
  • Rapid Feed: 1,417ipm

Supercell-Series

Ideal for both unmanned one-off and high quantity production. Linear guide way system.

Supercell-300G

  • Travel (X, Y, Z): 18.1″ x 20.1″ x 18.1″ (460 x 510 x 460mm)
  • Spindle: 40 taper, 20,000rpm
  • Std. 174 Tool ATC (Opt. 230, 258, 314)
  • Positioning Accuracy: +/-0.000079″ Full Stroke
  • Repeatability: +/-0.000039″

Supercell-400G

  • Travel (X, Y, Z): 20.1″ x 20.1″ x 20.1″ (510 x 510 x 510mm)
  • Spindle: 40 taper, 20,000rpm
  • Std. 140 Tool ATC (Opt. 190, 290)
  • Positioning Accuracy: +/-0.000039″ Full Stroke
  • Repeatability: +/-0.000002″

MedCenter5AX

High precision simultaneous 5-axis machining of small medical parts, micro machining.

MedCenter5AX

  • Travel (X, Y, Z): 10″ x 13″ x 13″ (254 x 330 x 330mm)
  • Spindle: 40 taper, 30,000rpm
  • Std. 40 tool ATC (Opt. 120)
  • Rapid Feed: 2,362ipm
Back To Top