Concept Machine Tool

   GD&T Advanced Concepts

 

Two Day Course by QC Training Inc.


Dates:      02/22/2018 - 02/23/2018
Time:        8:00 AM - 4:00 PM
Location: Concept Machine Tool | 15625 Medina Road | Minneapolis, MN 55447
Cost:         $845
Lunch:       Lunch is Included.

You will receive a confirmation email of your registration.


register

QC Training

Course Summary

This two-day course is a continuation of GD&T Fundamentals, again focusing on practical GD&T application and introducing additional advanced concepts such as the Datum at Virtual Condition Rule, tolerance calculation and more complex GD&T controls.

Target Audience

This program is designed for anyone who is currently familiar and proficient with the concepts and practices of GD&T. Particular emphasis is placed on those who are responsible for specifying and interpreting technical documentation. Individuals desiring to become a certified Geometric Dimensioning and Tolerancing Professional (GDTP) by passing the ASME GDTP exam will need this course.

Course Objectives

This program is a complete review of the Y14.5M-1994 and Y14.5-2009 standards. In this GD&T Training we continue with practical team exercises designed to enhance knowledge, build confidence and nurture a team environment. This class is minimum lecture, maximum experience and participation format. Complex controls (composite position, projected tolerance zone, etc.) are covered as well as calculating tolerances and functional gage design. This program is a continuation of your education in the Y14.5 standard. In this program, we focus on the application and interpretation of GD&T – another step closer to becoming a GD&T expert.

Benefits

This program is a continuation of your education in the Y14.5 standard. In this program, we focus on the application and interpretation of GD&T – another step closer to becoming a GD&T expert.

Agenda

The program begins with a review of GD&T, and then continues with practical team exercises designed to enhance knowledge, build confidence, and nurture a team environment. This class is a minimum lecture, maximum experience and participation format.

  • Introduction – Objectives, review GD&T Fundamentals.
  • General rules of dimensioning and drafting review.
  • Review of the more complex controls – composite position, projected tolerance zone, etc.
  • Datum Reference Frames – proper selection and utilization exercises.
  • Calculating tolerances for maximum producibility and 100% interchangeability.
  • Functional gauge design – “Soft” or “Paper” as well as tooled gauges.